Ice Melt Systems For Existing Tile Roofs

Effective Ice Dam Prevention For Existing Tile Roofs

EASY INSTALL,UL LISTED,MELT MORE WITH LESS!

If you are ready to eliminate ice dams with a safe, effective and energy-efficient ice dam prevention system, contact HotEdge today or get a free quote!


HotShinlge LOK®

HotShingle LOK is a one-piece roof edge ice melt system engineered to lock onto existing concrete tile without penetrating the roof deck. A specially designed three-sided angulated raceway securely holds a secure a single commercial grade self-regulating heat trace cable in place for a direct heat transfer. The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicle formations on all roof edges. Less heat trace cable means lower energy costs. Easily installs around gutters and downspouts. And since no modifications are required to the existing roof structure, overall project costs remain a fraction of all other market alternatives. HotShingle LOK2X and 3X are engineered to hold two and three heat trace cable runs for extreme applications when a minimum of 20+ inches of melt back from roof edge is needed.

UL Listed

Energy Savings Calculator

HotShingle LOK-Data-Sheet orange

See HotShingle LOK Vs. Aluminium Metal Track Concept

For Color Chart Click Here 


HotShingle LOK2X®

HotTileLOK 2X existing

HotShinlge LOK2X is a one-piece roof edge ice melt system engineered to lock onto existing concrete tile edge without penetrating roof deck.  Specially designed three-sided angulated raceways securely hold commercial grade self-regulating heat trace cables in place for a direct heat transfer for maximum performance and achieve a minimum 20-inch melt back.  The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicle formations on roof edges.  Less heat trace cable means lower energy costs.  In addition, comparative thermal analysis completed by an independent third-party helped to determine the optimal distance between heat cables to achieve maximum melting capacity.  Easily installs around gutters and downspouts.  And since no modifications are required to the existing roof structure, overall project costs remain a fraction of all other market alternatives.

UL Listed

Energy Savings Calculator

See HotShingle LOK2X Data Sheet

See HotShingle LOK2X Vs. Aluminium Metal Track Concept

For Color Chart Click Here 


 

HotValley®

HotValley creates a wide melt path for snow meltwater to prevent ice dam formations. It is recommended that HotValley be used in combination with any HotEdge roof edge ice melt system since it is always critical that snow meltwater created by HotValley is not able to re-freeze on the roof edges where icicles and ice dams could form. HotValley is composed of a three-sided metal track designed to encapsulate one or two runs of commercial-grade 12W self-regulating UL-approved deicing heat cable. It is designed for fast, simple installation in all roof valleys. The HotValley is attached to the valley with high-quality commercial-grade polyurethane adhesive, avoiding penetrations to the roof deck. Thermal energy is conducted directly from the heating cable to the HotValley track, and radiates outward from the track, resulting in a wide melt path sufficient to prevent pooling and allow snow-melt to reach the heated roof eave.

UL Listed

Energy Savings Calculator

See HotValley Data Sheet

See HotTileLOK3X Vs. Aluminium Metal Track Concept

For Color Chart Click Here 


GET YOUR FREE QUOTE!