HOTEDGE SYSTEMS FOR EXISTING SYNTHETIC ROOFS

NO MODIFICATIONS , UL LISTED and MELT MORE with LESS


HotSlateLOK®

hotshinglelok-16-1102-slate   

HotSlateLOK is a patent pending one-piece roof edge ice melt system engineered to lock onto existing synthetic slate shingle roof edge without penetrating roof deck. A specially designed three sided angulated raceway securely holds a secure a single commercial grade self-regulating heat trace cable in place for a direct heat transfer. The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicles formations on all roof edges. Less heat trace cable means lower energy costs. Easily installs around gutters and downspouts. And since no modifications are required to existing roof structure, overall project costs remain a fraction of all other market alternatives. HotShingleLOK2X and 3X are engineered to hold two and three heat trace cable runs for extreme applications when a minimum of 20+ inches of melt back from roof edge is needed.

UL Listed 

See HotSlateLOK Data Sheet

See HotSlateLOK Vs. Aluminium Metal Track Concept

For Color Chart Click Here 


 HotSlateLOK2X®

hotslatelok2x-install-render-2-slate-exsisting

 

HotSlateLOK2X is a simple patent pending one-piece roof edge ice melt system engineered to lock onto existing synthetic slate shingle roof edge without penetrating roof deck.  Specially designed three sided angulated raceways securely hold commercial grade self-regulating heat trace cables in place for a direct heat transfer for maximum performance and achieve a minimum 20 inch melt back.  The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicles formations on roof edges.  Less heat trace cable means lower energy costs.  In addition, comparative thermal analysis completed by an independent third party helped to determine the optimal distance between heat cables to achieve maximum melting capacity.  Easily installs around gutters and downspouts.  And since no modifications are required to existing roof structure, overall project costs remain a fraction of all other market alternatives.

UL Listed 

See HotSlateLOK2X Data Sheet

See HotSlateLOK2x Vs. Aluminium Metal Track Concept

For Color Chart Click Here 


HotSlateLOK3X

HotSlateLOK3X is a simple patent pending one-piece roof edge ice melt system engineered to lock onto existing synthetic slate shingle roof edge without penetrating roof deck.  Specially designed three sided angulated raceways securely hold commercial grade self regulating heat trace cables in place for a direct heat transfer for maximum performance and achieve a minimum 30 inch melt back.  The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicles formations on roof edges.  Less heat trace cable means lower energy costs.  In addition, comparative thermal analysis completed by an independent third party helped to determine the optimal distance between heat cables to achieve maximum melting capacity.  Easily installs around gutters and downspouts.  And since no modifications are required to existing roof structure, overall project costs remain a fraction of all other market alternatives.

UL Listed 

See HotSlateLOK3X Data Sheet

See HotSlateLOK3X Vs. Aluminium Metal Track Concept

For Color Chart Click Here 


HotValley®

 

HotValley creates wide melt path for snow melt water to prevent ice dam formations. It is recommended that HotValley be used in combination with any HotEdge roof edge ice melt system since it is always critical that snow melt water created by HotValley is not able to re-freeze on roof edges where icicles and ice dams could form. HotValley is composed of a three sided metal track designed to encapsulate one or two runs of commercial-grade 12W self-regulating UL-approved deicing heat cable. It is designed for fast, simple installation in all roof valleys. The HotValley is attached to the valley with high quality commercial grade polyurethane adhesive, avoiding penetrations to the roof deck. Thermal energy is conducted directly from the heat cable to the HotValley track, and radiates outward from the track, resulting in a wide melt path sufficient to prevent pooling and allow snowmelt to reach the heated roof eave.

UL Listed 

See HotValley Data Sheet

For Color Chart Click Here 

 


HotFlashing®

HotFlashing panels create an ice free zone where walls meet roof structures. Taking advantage of direct heat transfer, HotFlashing creates a wide melt path that prevents snowmelt water from re-freezing on roof structure.  This strategic design can also be utilized to create wide melt paths for snow melt water in commercial gutters, parameters of dormers, around chimneys and prevent refreezing (icicles) on extended fascia regions. The open raceway design conforms to the NEC (National Electrical Code) Article 426 and provides access for insertion, inspection and replacement.

UL Listed 

See HotFlashing Data Sheet

For Color Chart Click Here 


HotSeam®

 

HotSeam attaches to existing standing-seam metal roofs to create melt pathways on metal roof decks. This NEW patent-pending system is used in conjunction with the HotEdge rail to prevent ice melt from refreezing and forming icicles and ice dams on the roof edge. HotSeam is designed to firmly press heat cable against the existing metal roof panel along the seam, conducting thermal energy directly to the exposed roof panel to create a melt path down to the roof’s edge. When installed, a retention device clamps to the raised seam, providing a padded loop to securely hold the 12-watt commercial-grade, self-regulating heat cable in place.

UL Listed 

See HotSeam Data Sheet

See HotSeam Vs. Aluminium Metal Track Concept

For Color Chart Click Here 



GET YOUR FREE QUOTE!