HOTEDGE SYSTEMS FOR EXISTING ASPHALT SHINGLE ROOFS

NO MODIFICATIONS , UL LISTED and MELT MORE with LESS


HotShingleLOK®

HotShingleLOK is a patent pending one-piece roof edge ice melt system engineered to lock onto existing asphalt composite shingle without penetrating roof deck. A specially designed three sided angulated raceway securely holds a secure a single commercial grade self regulating heat trace cable in place for a direct heat transfer. The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicles formations on all roof edges. Less heat trace cable means lower energy costs. Easily installs around gutters and downspouts. And since no modifications are required to existing roof structure, overall project costs remain a fraction of all other market alternatives. HotShingleLOK2X and 3X are engineered to hold two and three heat trace cable runs for extreme applications when a minimum of 20+ inches of melt back from roof edge is needed.

UL Listed

See HotShingleLOK vs. Aluminum Metal Track Concept 

HotShingleLOK Data Sheet 

For Color Chart Click Here 


HotShingleLOK2X®

hotshinglelok2x

 

 

 

 

HotShingleLOK2X is a simple patent pending one-piece roof edge ice melt system engineered to lock onto existing shingle roof edge without penetrating roof deck.  Specially designed three sided angulated raceways securely hold commercial grade self regulating heat trace cables in place for a direct heat transfer for maximum performance and achieve a minimum 20 inch melt back.  The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicles formations on roof edges.  Less heat trace cable means lower energy costs.  In addition, comparative thermal analysis completed by an independent third party helped to determine the optimal distance between heat cables to achieve maximum melting capacity.  Easily installs around gutters and downspouts.  And since no modifications are required to existing roof structure, overall project costs remain a fraction of all other market alternatives.

UL Listed

See HotShingleLOK2X Data Sheet 

See HotShingleLOK2X vs. Aluminum Metal Track Concept 

For Color Chart Click Here 


HotShingleLOK3X®

hotshinglelok3x-2-aspahlt-exsisting hotshinglelok3x-asphalt-exsisting

HotShingleLOK3X is a simple patent pending one-piece roof edge ice melt system engineered to lock onto existing shingle roof edge without penetrating roof deck.  Specially designed three sided angulated raceways securely hold commercial grade self regulating heat trace cables in place for a direct heat transfer for maximum performance and achieve a minimum 30 inch melt back.  The benefit of a direct heat transfer is less heat trace cable is needed to prevent ice dam and icicles formations on roof edges.  Less heat trace cable means lower energy costs.  In addition, comparative thermal analysis completed by an independent third party helped to determine the optimal distance between heat cables to achieve maximum melting capacity.  Easily installs around gutters and downspouts.  And since no modifications are required to existing roof structure, overall project costs remain a fraction of all other market alternatives.

UL Listed

See HotShingleLOK3X vs. Aluminum Metal Track Concept 

For Color Chart Click Here


HotFlashing®                                                                        

HotValley creates wide melt path for snow melt water to prevent ice dam formations. It is recommended that HotValley be used in combination with any HotEdge roof edge ice melt system since it is always critical that snow melt water created by HotValley is not able to re-freeze on roof edges where icicles and ice dams could form. HotValley is composed of a three sided metal track designed to encapsulate one or two runs of commercial-grade 12W self-regulating UL-approved deicing heat cable. It is designed for fast, simple installation in all roof valleys. The HotValley is attached to the valley with high quality commercial grade polyurethane adhesive, avoiding penetrations to the roof deck. Thermal energy is conducted directly from the heat cable to the HotValley track, and radiates outward from the track, resulting in a wide melt path sufficient to prevent pooling and allow snowmelt to reach the heated roof eave.

UL Listed

See HotValley Data Sheet

For Color Chart Click Here


GET YOUR FREE QUOTE!